Common Paslode Tool Issues Across All ModelsUpdated 2 hours ago

Nail Jamming

Possible Causes

• Incorrect fasteners
• Dirty magazine
• Damaged fasteners
• Worn feed mechanism

Resolution

• Remove all jammed nails.
• Clean the magazine.
• Use genuine Paslode fixings.
• Replace worn feed components.

Tool Cycles Slowly

The tool takes longer than normal to reset between shots.

Possible Causes

• Dirty fan assembly
• Carbon build-up
• Worn internal components
• Poor maintenance

Resolution

• Perform a full tool clean.
• Remove carbon deposits.
• Inspect moving components.
• Arrange servicing if required.

Contact Tip Not Operating Correctly

The safety tip becomes stiff or fails to move.

Possible Causes

• Dirt and debris
• Damaged spring
• Excessive wear

Resolution

• Clean the contact tip assembly.
• Lubricate moving parts where recommended.
• Replace damaged components.