DeWalt JigsawsUpdated 5 hours ago

Blade falls out during use

Possible causes

• Blade not fully seated
• Wrong blade type
• Worn blade clamp

Resolution

• Use only compatible T-shank blades.
• Fully insert blade into the clamp mechanism.
• Inspect clamp and replace if damaged.

Blade wanders or cuts crooked

Possible causes

• Dull blade
• Excessive feed pressure
• Incorrect blade selection

Resolution

• Fit a fresh blade designed for the material.
• Let the blade cut at its own speed.

Reduce sideways pressure.

Blade does not move

Possible causes

• Battery or power issue
• Internal drive mechanism fault
• Incorrect blade installation

Resolution

• Check battery charge and power supply.
• Reinstall blade correctly.
• If motor runs but blade does not move, tool requires service.