DeWalt Mitre SawsUpdated 5 hours ago

Cuts are not square or accurate

Possible causes

• Dull blade
• Fence misalignment
• Mitre detent needs adjustment

Resolution

• Replace or sharpen blade.
• Check fence for straightness.
• Calibrate the mitre angle using a square and adjust detents according to DeWalt instructions.

Angle cuts are inaccurate

Possible causes

• Incorrect mitre or bevel settings
• Fence not aligned

Resolution

• Verify bevel and mitre settings.
• Recalibrate bevel stops and fence alignment.
• Test cut on scrap material before production work 

Motor overheating

Possible causes

• Continuous heavy cutting
• Dull blade
• Blocked ventilation

Resolution

• Allow tool to cool.
• Clean ventilation ports.
• Fit a sharp blade suitable for the material. 

Blade stalls or binds

• Check material for nails, screws, knots, or obstructions.
• Ensure blade is sharp and correctly installed.
• Reduce feed pressure.