DeWalt Plunge SawsUpdated 5 hours ago
Saw not tracking correctly on guide rail
Possible causes
- Rail cams not adjusted
- Damaged or dirty guide rail
Resolution
- Adjust anti-play cams according to the manual.
- Clean rail surfaces and splinter guard.
- Check rail for damage.
Rough or chipped cuts
Possible causes
- Damaged blade
- Worn splinter strip
- Incorrect blade type
Resolution
- Replace blade.
- Inspect and replace splinter guard strip.
- Use fine-tooth blades for finished materials
Kickback when plunge cutting
Resolution
- Ensure rail is secured.
- Engage anti-kickback features.
- Use correct plunge technique and maintain steady forward pressure.