Impact Driver IssuesUpdated 4 hours ago

Bit Keeps Falling Out

Impact driver bits should lock securely during operation.

Possible Causes

• Worn collet mechanism
• Damaged retaining ring
• Dirt inside the collet
• Incorrect bit type

Resolution

• Clean the collet thoroughly.
• Ensure you're using ¼" hex impact-rated accessories.
• Inspect the locking mechanism for wear.
• Replace damaged collet parts if required.

Reduced Driving Power

The impact driver struggles to drive larger fixings.

Possible Causes

• Worn impact mechanism
• Gearbox wear
• Internal component wear
• Build-up of debris internally

Resolution

• Check for unusual noises during operation.
• Clean the tool externally.
• Use the correct accessory for the application.
• Arrange servicing if performance remains poor.

Impact Function Not Engaging

The motor runs, but no hammering action occurs.

Possible Causes

• Worn impact assembly
• Damaged anvil mechanism
• Gearbox fault

Resolution

• Test the tool under load.

If impact action remains absent, professional repair is recommended.