Trend Circular Saw & Track Saw IssuesUpdated an hour ago

Cut Wanders Off Line

The saw struggles to maintain a straight cut.

Possible Causes

• Dull blade
• Damaged guide rail
• Incorrect blade selection
• Excessive feed force

Resolution

• Fit a sharp, appropriate blade.
• Check guide rails for damage or movement.
• Allow the saw to cut naturally without forcing it.

Ensure the workpiece is properly supported.

Burning During Cuts

Scorch marks appear on timber or sheet materials.

Possible Causes

• Dull blade
• Incorrect blade type
• Feed speed too slow
• Resin build-up on blade

Resolution

• Clean or replace the blade.
• Use a blade suitable for the material.
• Increase feed rate appropriately.
• Remove resin or pitch build-up.

Excessive Vibration

Unusual vibration can affect accuracy and safety.

Possible Causes

• Damaged blade
• Loose blade mounting
• Worn bearings
• Debris around the blade assembly

Resolution

• Inspect and replace damaged blades.
• Tighten blade fixings.
• Clean the blade housing.
• Arrange servicing if vibration continues.