Trend Router IssuesUpdated 2 hours ago

Router Bit Slipping

A slipping cutter can affect both safety and accuracy.

Possible Causes

• Collet not tightened correctly
• Worn collet
• Dirt inside the collet assembly
• Incorrect cutter shank size

Resolution

• Remove and clean the collet thoroughly.
• Check the cutter matches the collet size.
• Tighten securely according to the manufacturer's guidance.
• Replace worn collets if necessary.

Poor Cutting Finish

Cuts may appear rough, burnt or uneven.

Possible Causes

• Dull router cutter
• Incorrect feed speed
• Damaged cutter
• Incorrect router speed setting

Resolution

• Replace or sharpen the cutter.
• Adjust feed speed to suit the material.
• Inspect the cutter for damage.
• Select the appropriate speed setting for cutter size.

Router Depth Adjustment Sticking

Depth settings become difficult to adjust accurately.

Possible Causes

• Dust build-up
• Lack of maintenance
• Damaged adjustment mechanism

Resolution

• Clean adjustment columns and mechanisms.
• Remove any accumulated debris.
• Apply suitable lubrication where recommended.
• Replace worn adjustment components if required.