Metabo SDS+ Drill IssuesUpdated 8 hours ago

SDS Bit Won't Lock Into the Chuck

One of the most common issues experienced with SDS drills.

Possible Causes

• Dust or debris inside the chuck
• Lack of SDS grease
• Worn locking balls
• Damaged SDS shank

Resolution

• Clean the chuck thoroughly.
• Apply appropriate SDS lubricant.
• Inspect the drill bit shank for wear.

Replace worn chuck components where necessary.

SDS Bit Gets Stuck

The drill bit cannot be removed from the chuck.

Possible Causes

• Dirt build-up
• Lack of lubrication
• Damaged retaining mechanism
• Excessive wear within the chuck

Resolution

• Apply lubricant to the chuck mechanism.
• Operate the chuck sleeve repeatedly.
• Remove dust and debris from the chuck.
• Arrange servicing if the problem persists.

Weak Hammer Action

The drill rotates but struggles when drilling into masonry.

Possible Causes

• Worn piston assembly
• Internal seal wear
• Mechanical wear
• Insufficient lubrication

Resolution

• Confirm hammer mode is selected.
• Listen for unusual operating noises.

Arrange servicing if hammer performance has noticeably reduced.

Excessive Vibration

Strong vibration can indicate mechanical wear.

Possible Causes

• Worn bearings
• Damaged hammer mechanism
• Bent SDS accessory
• Gearbox wear

Resolution

• Replace damaged accessories.
• Inspect the chuck assembly for wear.
• Have bearings and gearbox checked if vibration continues.